When your shower starts to show its age, you may begin to consider replacing it. This is a big decision, but it can be the right one for your home. But before you start the remodeling process, there are a few things you should do to prepare. Keep reading to learn what to do before a Phoenix shower replacement.
Determine the budget for the project.
A budget is important when planning any home improvement project, and a shower remodel is no exception. Determining the budget for your shower remodel will help you determine the type of shower you can afford. If your budget is limited, you may need to consider a more economical option, such as a prefabricated shower. However, if you have a little more money to spend, you may want to consider a custom shower with luxurious features like a steam shower or a rainfall showerhead.
Once you have determined your budget, you can start to think about the specific features you want in your shower. A prefabricated shower may be the best option if you want a quick and easy remodel. These showers are available in various styles and colors and typically install in less than a day. You can choose a shower with a tiled enclosure or a frameless glass enclosure if you want a more customized look. You can also choose from various showerheads, including handheld, rainfall, and massage showerheads.
Clear the area.
If you plan to replace your shower, you will need to clear the area where the shower will be replaced. The first step is to remove all of the items from the bathroom. This includes the toilet, sink, and all of the fixtures. You may also want to remove the shower curtain and liners. Next, you need to protect the floor and walls. You can do this by using tape and plastic sheeting. Make sure to cover all surfaces that may be affected by the renovation. The next step is to disconnect the showerhead and the plumbing. Be sure to label the connections so that you can reconnect them later. Now is a good time to start painting or repainting the walls and ceiling. You may also want to install new flooring or tile. Once the preparation is complete, you can start the renovation.
Shut off the water and drainage.
When you have a shower replacement, one of the main things you need to do is shut off the water and drainage. This will help make the process go smoother and keep your home from flooding. Here are the steps to shut off the water: Locate the main water line for your house. This is usually in the basement or crawlspace. Shut off the valve on the main water line. Make sure to turn it all the way off so that no more water can flow through it. Check all of your other valves, including those for sinks, toilets, and appliances. Ensure they are also turned off so that no additional water flows into your home while replacing your shower. Go upstairs and open all of the faucets in your house so that any remaining water in the pipes can drain out. This will help minimize flooding when you remove your old showerhead unit.
Remove the shower head, handle, and spout.
Removing the shower head, handle, and the spout is a necessary first step in any shower replacement project. It allows you to access the screws that hold the old fixture in place. Begin by turning off the water supply to the shower. Then use a wrench to loosen the nuts that secure the shower head, handle, and spout in place. Be careful not to damage them while removing them. Once they are loose, you can pull them off of the pipe.
The most important thing to do before a shower replacement is to overall assess the damage and determine what needs to be replaced. From there, you can order the necessary materials and begin the replacement process.